TM 5-2410-241-23-3
0268
DISASSEMBLY CONTINUED
N OT E
Left stabilizer bar weighs 175 lb (79 kg).
3. Attach suitable lifting device to left stabilizer bar (Figure 9, Item 6).
N OT E
Note location and quantity of shims to aid installation.
4. Remove four bolts (Figure 9, Item 2), nuts (Figure 9, Item 10), yoke half (Figure 9, Item 1), and shim pack
(Figure 9, Item 3) from blade assembly (Figure 9, Item 4).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may cause injury or death to personnel.
N OT E
Note location of pin and stabilizer bar on arm to aid installation.
5. Remove cotter pin (Figure 9, Item 8) from retaining pin (Figure 9, Item 7). Discard cotter pin.
6. Remove retaining pin (Figure 9, Item 7), pin (Figure 9, Item 5), and left stabilizer bar (Figure 9, Item 6) from left
push arm (Figure 9, Item 9).
7. Remove lifting device.
0268-10