TM 5-2410-240-10
0012
Table 1. Preventive Maintenance Checks and Services (PMCS).
0012
LOCATION
ITEM TO BE
CHECKED
OR
EQUIPMENT NOT
ITEM
MAN-
SERVICED
PROCEDURE
READY/AVAILABLE IF:
NO.
INTERVAL HOURS
N OT E
Review all WARNINGs, CAUTIONs, and NOTEs before
performing PMCS and operating the machine.
Perform all PMCS checks if:
1. You are the assigned operator but have not operated the
machine since the last weekly checks.
2. You are operating the machine for the first time.
Unless otherwise indicated, perform PMCS with machine
parked on level ground, parking brake applied, blade
lowered to the ground, tracks blocked, and engine shut
down.
If leakage is detected during performance of PMCS,
further investigation is required to determine location and
cause of leak.
Walk around machine and look for any obvious leaks or
damage.
LEFT SIDE
1
Before
Dozer Blade,
a. Check dozer blade, cutting
Damaged, missing, or
Cutting Edges,
edge and end bits for damage or
excessively worn
End Bits, and
excessive wear.
components that would
Blade
impair operation are
b. Check blade mounting at C-
Mounting
evident.
frame for debris, damage or
missing components.
2
Before
Overall View
a. Check left side of machine for
Any fuel or coolant leak, or
evidence of leakage or damage.
any Class III leaks or
damage that would impair
b. Check for evidence of fluid
operation are evident, or
leakage or damage at front belly
one or more belly guard
guard.
bolts missing.
