TM 5-2410-240-23-1
0021
Table 1. Cab Troubleshooting Without Codes. - Continued.
0021
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
5. All Front and Rear Flood Lamps
4. Using a digital multimeter,
Voltage Within 18 to 26 Volts -
Do Not Work - Continued
measure for voltage (WP
Proceed to Test Step 4.
0283) between C-C4 terminal
Voltage Not Within 18 to 26
2 (WP 0018, Figure 16) and
Volts - Proceed to Test Step 14.
ground.
Test Step 4. Test for Open Flood
Lamp Switch.
1. Turn battery disconnect switch
to OFF position (TM 5-2410-
240-10).
2. Disconnect harness connec-
tor C-C6 (WP 0018, Figure 18)
from LH wiper switch (WP
0018, Figure 64).
3. Connect harness connector C-
C4 (WP 0018, Figure 16) on
LH wiper switch (WP 0018,
Figure 64).
4. Turn battery disconnect switch
to ON position (TM 5-2410-
240-10).
All Flood Lamps Work - Turn LH
5. Turn LH wiper switch to ON
wiper switch to OFF position (TM
position (TM 5-2410-240-10).
5-2410-240-10).
Inspect front and rear flood
lamps.
Turn battery disconnect switch to
OFF position (TM 5-2410-240-10).
Disconnect C-C4 (WP 0018,
Figure 16) from LH wiper switch
(WP 0018, Figure 64).
Replace flood lamp switch (WP
0217).
Connect C-C6 (WP 0018, Figure
18) on LH wiper switch (WP 0018,
Figure 64).
Install fuse panel front cover on
machine (TM 5-2410-240-10).
Verify proper operation of flood
lamps (TM 5-2410-240-10).
0021-83