TM 5-2410-240-23-1
0021
Table 2. Cab Troubleshooting With Codes. - Continued.
0021
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2679-04 Blade Shake Switch Voltage
15. Using digital multimeter, test
No Continuity - Replace lower
Below Normal - Continued
for continuity (WP 0283)
cab harness (WP 0228). Ensure all
between harness connector
harness connectors are recon-
C-C12 (WP 0018, Figure 22)
nected. Verify proper operation of
terminal 52 and harness con-
machine (TM 5-2410-240-10).
nector C-C23 (WP 0018, Fig-
Continuity - Proceed to step 16.
ure 25) terminal 5.
16. Using digital multimeter, test
No Continuity - Proceed to
for continuity (WP 0283)
step 17.
between harness connector
Continuity - Replace lower cab
C-C12 (WP 0018, Figure 22)
harness (WP 0228). Ensure all
terminal 52 and all other termi-
harness connectors are recon-
nals in harness connector C-
nected. Verify proper operation of
C12 (WP 0018, Figure 22).
machine (TM 5-2410-240-10).
17. Using digital multimeter, test
No Continuity - Proceed to
for continuity (WP 0283)
step 18.
between harness connector
Continuity - Replace lower cab
C-C12 (WP 0018, Figure 22)
harness (WP 0228). Ensure all
terminal 51 and all other termi-
harness connectors are recon-
nals in harness connector C-
nected. Verify proper operation of
C12 (WP 0018, Figure 22).
machine (TM 5-2410-240-10).
18. Disconnect harness connec-
tor PL-C4 (WP 0018, Figure
217) from equipment ECM J1.
19. Disconnect harness connec-
tor PL-C5 (WP 0018, Figure
218) from equipment ECM J2.
20. Using digital multimeter), test
No Continuity - Replace platform
for continuity (WP 0283)
wiring harness (WP 0150,
between harness connector
WP 0155). Ensure all harness con-
PL-C4 (WP 0018, Figure 217)
nectors are reconnected. Verify
terminal 56 and harness con-
proper operation of machine (TM
nector PL-C1 (WP 0018, Fig-
5-2410-240-10).
ure 214) terminal 44.
Continuity - Proceed to step 21.
21. Using digital multimeter, test
No Continuity - Replace platform
for continuity (WP 0283)
wiring harness (WP 0150,
between harness connector
WP 0155). Ensure all harness con-
PL-C4 (WP 0018, Figure 217)
nectors are reconnected. Verify
terminal 63 and harness con-
proper operation of machine (TM
nector PL-C1 (WP 0018, Fig-
5-2410-240-10).
ure 214) terminal 51.
Continuity - Proceed to step 22.
0021-303