TM 5-2410-240-23-1
0021
Table 2. Cab Troubleshooting With Codes. - Continued.
0021
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2679-04 Blade Shake Switch Voltage
8. Using digital multimeter, test
No Continuity - Replace seat har-
Below Normal - Continued
for continuity (WP 0283)
ness (WP 0236). Ensure all har-
between harness connector
ness connectors are reconnected.
CA-C2 (WP 0018, Figure 70)
Verify proper operation of machine
terminal 4 and harness con-
(TM 5-2410-240-10).
nector CA-C7 (WP 0018, Fig-
Continuity - Proceed to step 9.
ure 73) terminal 6.
9. Using digital multimeter, test
No Continuity - Replace seat har-
for continuity (WP 0283)
ness (WP 0236). Ensure all har-
between harness connector
ness connectors are reconnected.
CA-C2 (WP 0018, Figure 70)
Verify proper operation of machine
terminal 5 and harness con-
(TM 5-2410-240-10).
nector CA-C7 (WP 0018, Fig-
Continuity - Proceed to step 10.
ure 73) terminal 7.
10. Using digital multimeter, test
No Continuity - Proceed to
for continuity (WP 0283)
step 11.
between harness connector
Continuity - Replace seat harness
CA-C7 (WP 0018, Figure 70)
(WP 0236). Ensure all harness
terminal 7 and all other termi-
connectors are reconnected. Verify
nals in harness connector CA-
proper operation of machine (TM
C7 (WP 0018, Figure 70).
5-2410-240-10).
11. Using digital multimeter, test
No Continuity - Proceed to
for continuity (WP 0283)
step 12.
between harness connector
Continuity - Replace seat harness
CA-C7 (WP 0018, Figure 70)
(WP 0236). Ensure all harness
terminal 6 and all other termi-
connectors are reconnected. Verify
nals in harness connector CA-
proper operation of machine (TM
C7 (WP 0018, Figure 70).
5-2410-240-10).
12. Disconnect harness connec-
tor C-C12 (WP 0018, Figure
22) from PL-C1 (WP 0018,
Figure 214).
13. Using digital multimeter, test
No Continuity - Replace lower
for continuity (WP 0283)
cab harness (WP 0228). Ensure all
between harness connector
harness connectors are recon-
C-C12 (WP 0018, Figure 22)
nected. Verify proper operation of
terminal 51 and harness con-
machine (TM 5-2410-240-10).
nector C-C23 (WP 0018, Fig-
Continuity - Proceed to step 14.
ure 25) terminal 4.
14. Using digital multimeter, test
No Continuity - Replace lower
for continuity (WP 0283)
cab harness (WP 0228). Ensure all
between harness connector
harness connectors are recon-
C-C12 (WP 0018, Figure 22)
nected. Verify proper operation of
terminal 44 and harness con-
machine (TM 5-2410-240-10).
nector C-C24 (WP 0018, Fig-
Continuity - Proceed to step 15.
ure 26) terminal 9.
0021-302
