52
TM 5-2410-240-23-1
FIELD MAINTENANCE
-
WINDOW WIPER AND WASHER TROUBLESHOOTING PROCEDURES
0
022
INITIAL SETUP
References - Continued
Tools and Special Tools
0
0
Tool Kit, General Mechanic's (WP 0289, Item
WP 0153
0
51)
WP 0154
0
0
Multimeter (WP 0289, Item 85)
WP 0155
0
0
Tip G (WP 0289, Item 65)
WP 0201
0
0
WP 0207
Materials/Parts
0
0
WP 0208
0
Rag, wiping (WP 0290, Item 21)
0
WP 0209
0
Tag, marker (WP 0290, Item 30)
0
WP 0212
0
Personnel Required
WP 0223
0
0
Two
WP 0228
0
0
WP 0229
0
References
0
WP 0283
0
0
Equipment Conditions
WP 0150
0
0
Machine parked (TM 5-2410-240-10)
0
This work package contains troubleshooting information for the D6K Dozer. Each malfunction or symptom listed is
followed by the possible cause(s) and suggested remedy or remedies. This work package should be used to help
isolate and correct system problems.
00022
Ensure all PMCS and operator troubleshooting procedures (TM 5-2410-240-10) have been performed before con-
tinuing.
00022
N OT E
Tag and identify connectors to aid installation.
This test is designed to diagnose one fault ata time. If the system has multiple component
failures, it may be necessary to perform this test again after making initial repairs.
Always inspect the harness connectors that ae involved in the circuit. Poor connections
r
can often be the cause of a problem. Verify that all connections in the circuit are clean,
secure, and in good condition. If a problem with a connection is found, correct the problem
before performing this procedure.
0022-1