TM 5-2410-240-23-1
0023
Table 1. Blade, Winch, and Ripper Troubleshooting Without Codes - Continued.
0023
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6. Cycle Time Too Slow for 1.
Inspect hydraulic system for
Hydraulic System Leaking or Dam-
Lift Cylinders, Tilt Cylin-
Class III leaks and damage.
aged - Repair as necessary.
ders, Angle Cylinders, or
Hydraulic lines must be free from
Hydraulic System OK - Proceed to
Auxiliary Valve 1 (Rip-
kinks, sharp bends, and restric-
step 2.
per) Cylinder - Contin-
tions.
ued
N OT E
Wait at least 30 seconds for diagnostic codes to become active.
Code Active - Diagnose and repair
2. Connect MSD (WP 0016). Select
active code (WP 0013).
machine control D6K ECM and
check for active diagnostic and
Code Not Active - Proceed to step 3.
event codes.
3. Inspect cylinder seals of affected
Cylinder Seal Leaks - (External
implement(s) for Class III leaks.
Hose Leakage) - Repair affected cyl-
inder(s): Angle Cylinder (WP 0262);
Tilt Cylinder (WP 0261); Lift Cylinder
(WP 0260); Ripper Cylinder (WP
0270), if equipped.
No External Seal Leakage - Proceed
to step 4.
4. Perform Hydraulic Pump Test and
Pressure Reading Not Correct -
Adjustment (WP 0033).
Perform adjustments and/or tests as
directed in Hydraulic Pump Test and
Adjustment (WP 0033).
Pressure Reading Correct - Proceed
to step 5.
0023-11
