TM 5-2410-240-23-1
0023
Table 1. Blade, Winch, and Ripper Troubleshooting Without Codes - Continued.
0023
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6. Cycle Time Too Slow for 5.
Internal cylinder seals may be
Test Fails - Repair affected cylin-
Lift Cylinders, Tilt Cylin-
leaking. If internal leakage is sus-
der(s): Angle Cylinder (WP 0262); Tilt
ders, Angle Cylinders, or
pected, verify component opera-
Cylinder (WP 0261); Lift Cylinder (WP
Auxiliary Valve 1 (Rip-
tion. Refer to Drift Tests and
0260); Ripper Cylinder (WP 0270), if
per) Cylinder - Contin-
Speed Tests in Machine Opera-
equipped.
ued
tion (WP 0033).
Test OK - Replace affected valve:
Valve Bank 4 (Ripper) (WP 0196);
Valve Bank 3 (Winch) (WP 0197).
Figure 4. Valve Bank.
0023
