TM 5-2410-240-23-2
0061
WARN I N G
DO NOT perform fuel system checks, inspections, or maintenance while smoking or near
fire, flames, or sparks. Fuel may ignite, causing damage to equipment and injury or death
to personnel.
Allow engine to cool off before performing maintenance on fuel system. Hot metal parts
can cause severe burns. Wear eye, glove, and skin protection when working with heated
parts.
Wear fuel resistant gloves and eye protection when handling fuels. If exposed to fuel,
promptly wash exposed skin and change fuel-soaked clothing. Failure to follow these
warnings may result in injury or death to personnel.
REMOVAL
00061
C AU T I O N
Wipe area clean around fuel hoses and tubes. Contamination of fuel system could result in
premature failure.
N OT E
Cap fuel tubes and fittings.
Tag and note routing of fuel tubes to aid installation.
1. Loosen tube nut (Figure 1, Item 1) from fuel injection pump (Figure 1, Item 5).
2. Loosen tube nut (Figure 1, Item 2) from filter base (Figure 1, Item 3) and remove tube (Figure 1, Item 4) from
machine.
Figure 1. Third Fuel Filter to Fuel Injection Pump Tube.
0061