TM 5-2410-240-23-2
0061
REMOVAL CONTINUED
N OT E
Cap fuel tubes, hoses, and fittings.
Tag and note routing of tubes and hoses to aid installation.
13. Lift boot (Figure 7, Item 1), depress tab (Figure 7, Item 2), and disconnect hose (Figure 7, Item 11) from tube
assembly (Figure 7, Item 12).
14. Lift boot (Figure 7, Item 1), depress tab (Figure 7, Item 2), and disconnect tube assembly (Figure 7, Item 12)
from fuel injection pump (Figure 7, Item 3).
15. Loosen tube nut (Figure 7, Item 9) from fuel rail (Figure 7, Item 8).
16. Remove fluid passage bolt (Figure 7, Item 5), washer (Figure 7, Item 4), tube assembly (Figure 7, Item 12),
and washer (Figure 7, Item 6) from secondary fuel filter base (Figure 7, Item 7).
17. Remove tube assembly (Figure 7, Item 12) from eight clips (Figure 7, Item 10) and remove tube assembly from
machine.
Figure 7. Tube Assembly.
0061
END OF TASK