TM 5-2410-240-23-3
0174
REMOVAL CONTINUED
53. If not arctic kit heater equipped, lift boot (Figure 22, Item 3), squeeze tab (Figure 22, Item 4), and disconnect
fuel hose (Figure 22, Item 5) from connector (Figure 22, Item 6).
54. If not arctic kit heater equipped, remove connector (Figure 22, Item 6) from fuel shutoff (Figure 22, Item 7).
55. If not arctic kit heater equipped, remove O-ring (Figure 22, Item 10) from connector (Figure 22, Item 6). Discard
O-ring.
56. If not arctic kit heater equipped, loosen nut (Figure 22, Item 8) and remove fuel shutoff (Figure 22, Item 7) from
elbow (Figure 22, Item 1).
57. If not arctic kit heater equipped, remove O-ring (Figure 22, Item 11) from fuel shutoff (Figure 22, Item 7).
Discard O-ring.
58. If not arctic kit heater equipped, remove elbow (Figure 22, Item 1) from filter base (Figure 22, Item 2).
59. If not arctic kit heater equipped, remove O-ring (Figure 22, Item 9) from elbow (Figure 22, Item 1). Discard O-
ring.
60. Remove fuel hose (Figure 22, Item 5) from machine.
Figure 22. Fuel Hose Connector and Hardware Near Filter Base.
0174