TM 5-2410-240-23-3
0174
INSTALLATION CONTINUED
N OT E
Remove all caps and plugs from hose ends and fittings before installation.
Install all hoses and fittings as noted during removal.
1. If not arctic kit heater equipped, install fuel hose (Figure 25, Item 3) on machine.
2. If not arctic kit heater equipped, install new O-ring (Figure 25, Item 7) on elbow (Figure 25, Item 1).
3. If not arctic kit heater equipped, install elbow (Figure 25, Item 1) on filter base (Figure 25, Item 2).
4. If not arctic kit heater equipped, install new O-ring (Figure 25, Item 9) on fuel shutoff (Figure 25, Item 5).
5. If not arctic kit heater equipped, install fuel shutoff (Figure 25, Item 5) on elbow (Figure 25, Item 1) and tighten
nut (Figure 25, Item 6).
6. If not arctic kit heater equipped, install new O-ring (Figure 25, Item 8) on connector (Figure 25, Item 4).
7. If not arctic kit heater equipped, connect connector (Figure 25, Item 4) to fuel shutoff (Figure 25, Item 5).
8. If not arctic kit heater equipped, connect fuel hose (Figure 25, Item 3) to connector (Figure 25, Item 4).
Figure 25. Fuel Hose Connector and Hardware Near Filter Base.
0174