TM 5-2410-240-23-3
0187
REMOVAL
000187
N OT E
This procedure covers removal of debris guards on left side of machine. Follow the same
procedure when removing debris guards on right side of machine.
1. Remove two bolts (Figure 1, Item 3) and washers (Figure 1, Item 2) from machine and position guard
(Figure 1, Item 1) aside.
Figure 1. Angle and Tilt Hose Guard.
0187
2. Remove seven bolts (Figure 2, Item 1), washers (Figure 2, Item 2), upper debris guard (Figure 2, Item 3), and
lower debris guard (Figure 2, Item 4) from machine.
Figure 2. Debris Guards and Retaining Hardware.
0187
END OF TASK
CLEANING AND INSPECTION
000187
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK