TM 5-2410-240-23-3
0204
REMOVAL
000204
N OT E
Tag and mark connectors to aid installation.
1. Disconnect harness connector (Figure 1, Item 4) from A/C compressor pressure sensor (Figure 1, Item 3).
2. Position harness (Figure 1, Item 5) aside.
WARN I N G
A/C system is still under pressure. Use extreme caution when removing A/C compressor
pressure sensor. Do not loosen any other fittings. Failure to follow this warning may result
in injury or death to personnel.
3. Remove A/C compressor pressure sensor (Figure 1, Item 3) from A/C compressor (Figure 1, Item 1).
4. Remove O-ring (Figure 1, Item 2) from A/C compressor (Figure 1, Item 1). Discard O-ring.
Figure 1. Compressor Pressure Sensor.
0204
END OF TASK
CLEANING AND INSPECTION
000204
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK