TM 5-2410-240-23-3
0214
REMOVAL
000214
N OT E
Tag wiring harness connectors to aid installation.
1. Disconnect two wiring harness connectors (Figure 1, Item 5) from resistor (Figure 1, Item 4).
2. Remove two nuts (Figure 1, Item 2), washers (Figure 1, Item 3), and resistor (Figure 1, Item 4) from cab
(Figure 1, Item 1).
Figure 1. Cab Fan Resistor.
0214
END OF TASK
CLEANING AND INSPECTION
000214
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
INSTALLATION
000214
N OT E
Install wiring harness connectors as tagged during removal.
1. Install resistor (Figure 1, Item 4), two washers (Figure 1, Item 3), and nuts (Figure 1, Item 2) on cab (Figure 1,
Item 1).
2. Connect two wiring harness connectors (Figure 1, Item 5) on resistor (Figure 1, Item 4).
END OF TASK