• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 19. Upper and Lower Cab Harness Connector.
Figure 21. A/C Condenser Mounting Bracket at Back of Cab Left Side.

Field Maintenance Manual 3 D6K Dozer Type I With Winch and Type II With Ripper
Page Navigation
  534    535    536    537    538  539  540    541    542    543    544  
img
.
TM 5-2410-240-23-3
0229
INSTALLATION CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may result in injury or death to personnel.
N OT E
Condenser assembly weighs approximately 45 lb (20 kg).
17. Using lifting device, install A/C condenser and mounting bracket assembly to machine.
18. Install washer (Figure 20, Item 4) and bolt (Figure 20, Item 5) to back of cab (Figure 20 item 3).
19. Install three washers (Figure 20, Item 2) and bolts (Figure 20, Item 1) to back of cab (Figure 20, Item 3).
Figure 20. A/C Condenser Mounting Bracket at Back of Cab Right Side.
0229
0229-19


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.