TM 5-2410-240-23-3
0238
DISASSEMBLY CONTINUED
000238
N OT E
Note position and depth of seals and bearings before removing.
18. Remove two seals (Figure 22, Item 1) and bearings (Figure 22, Item 2) from housing (Figure 22, Item 3).
Discard seals.
Figure 22. Support Housing Seals and Bearings.
0238
END OF TASK
CLEANING AND INSPECTION
000238
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
ASSEMBLY
000238
N OT E
Install bearings and seals to same depth and position as noted during removal.
1. Install two bearings (Figure 22, Item 2) and new seals (Figure 22, Item 1) on housing (Figure 22, Item 3).
