TM 5-2410-240-23-3
0247
REMOVAL CONTINUED
6. Remove nut (Figure 4, Item 5), washer (Figure 4, Item 6), lower clamp (Figure 4, Item 3), and upper clamp
(Figure 4, Item 7) from stud (Figure 4, Item 4).
7. Remove spacer (Figure 4, Item 8) from stud (Figure 4, Item 4).
8. Remove stud (Figure 4, Item 4), washer (Figure 4, Item 9), clip (Figure 4, Item 10), and clamp (Figure 4,
Item 2) from engine (Figure 4, Item 11).
9. Remove clamp (Figure 4, Item 2) from heater hose (Figure 4, Item 1).
Figure 4. Heater Hose Retaining Hardware on Left Side of Engine.
0247