TM 5-2410-240-23-3
0275
REMOVAL CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting equipment used is in good condition
and of suitable load capacity. Keep clear of heavy parts supported by lifting equipment.
Failure to follow this warning may result in death or injury to personnel.
8. Install lifting device on left mounting assembly (Figure 3, Item 1).
9. Remove four bolts (Figure 3, Item 2), washers (Figure 3, Item 3), and left mounting assembly (Figure 3, Item 1)
from left bracket (Figure 3, Item 8).
10. Install lifting device on right mounting assembly (Figure 3, Item 6).
11. Remove four bolts (Figure 3, Item 4), washers (Figure 3, Item 5), and right mounting assembly
(Figure 3, Item 6) from right bracket (Figure 3, Item 7).
Figure 3. Bracket and Mounting Assemblies.
0275
END OF TASK
CLEANING AND INSPECTION
000275
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK