TM 5-2410-240-23-3
0278
ARCTIC HEATER BRACKET REMOVAL
000278
1. Remove two bolts (Figure 5, Item 2), washers (Figure 5, Item 3), and arctic heater mounting bracket left plate
(Figure 5, Item 4) from arctic heater mounting bracket right plate (Figure 5, Item 1).
Figure 5. Mounting Bracket.
0278
2. Disconnect wiring harness (Figure 6, Item 3) from fuel pump (Figure 6, Item 4).
3. Loosen clamp (Figure 6, Item 2) and disconnect upper fuel hose (Figure 6, Item 1) from fuel pump (Figure 6,
Item 4).
4. Loosen clamp (Figure 6, Item 20) and disconnect lower fuel hose (Figure 6, Item 18) from fuel pump (Figure 6,
Item 4).
5. Remove bolt (Figure 6, Item 7), nut (Figure 6, Item 8), washer (Figure 6, Item 6), rubber isolated bracket
(Figure 6, Item 5), and fuel pump (Figure 6, Item 4) from arctic heater mounting bracket (Figure 6, Item 13).
6. Remove bolt (Figure 6, Item 11), nut (Figure 6, Item 12), washer (Figure 6, Item 10), and clip (Figure 6, Item 9)
from arctic heater mounting bracket (Figure 6, Item 13).
7. Remove bolt (Figure 6, Item 15), nut (Figure 6, Item 16), washer (Figure 6, Item 14), clamp (Figure 6, Item 17),
and lower heater hose (Figure 6, Item 19) from arctic heater mounting bracket (Figure 6, Item 13).
8. Remove ether valve (WP 0048).
9. Remove arctic heater mounting bracket (Figure 6, Item 13) from machine.