TM 5-2410-240-23-3
0279
INSTALLATION
000279
WARN I N G
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may cause injury to personnel.
N OT E
Install hoses as tagged during removal.
Install new tiedown straps as noted during removal.
1. Apply sealing compound on two fittings (Figure 8, Item 1) and install on tee (Figure 8, Item 2).
2. Apply sealing compound on fitting (Figure 8, Item 3) and install on tee (Figure 8, Item 2).
N OT E
Install hoses as tagged during removal.
3. Install tee (Figure 8, Item 2) and two clamps (Figure 8, Item 5) on heater hose (Figure 8, Item 4).
4. Install clamp (Figure 8, Item 6) and hose (Figure 8, Item 7) on connector (Figure 8, Item 3) of tee
(Figure 8, Item 2).
0279-9
