TM 5-2410-240-23-3
0279
REMOVAL CONTINUED
22. Remove two clamps (Figure 8, Item 5) and heater hose (Figure 8, Item 4) from tee (Figure 8, Item 2).
23. Remove clamp (Figure 8, Item 6) and hose (Figure 8, Item 7) from tee (Figure 8, Item 2).
24. Remove hose (Figure 8, Item 7) from machine.
25. Remove tee (Figure 8, Item 2) and fittings (Figure 8, Items 1 and 3) from machine.
Figure 8. Water Inlet Hose and Fittings.
0279
END OF TASK
CLEANING AND INSPECTION
000279
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
