TM 5-2410-240-23-3
0280
INSTALLATION CONTINUED
N OT E
Position elbow with outlet pointing downward.
8. Install new O-ring (Figure 6, Item 4) and elbow (Figure 6, Item 1) on tee (Figure 6, Item 2).
WARN I N G
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may cause injury to personnel.
9. Apply sealing compound on fitting (Figure 6, Item 11) and install fitting on arctic kit heater fuel shutoff valve
(Figure 6, Item 10).
10. Apply sealing compound on connector (Figure 6, Item 9) and install connector on arctic kit heater fuel shutoff
valve (Figure 6, Item 10).
11. Install arctic kit heater fuel shutoff valve (Figure 6, Item 10) on elbow (Figure 6, Item 1).
12. Install fuel metering supply hose (Figure 6, Item 12) on connector (Figure 6, Item 11).
Figure 6. Arctic Kit Heater Fuel Supply Hose and Shutoff Valve.
0280
