TM 5-2410-241-23-1
0019
Table 2. Engine Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
545-6 Ether Start Relay
6. Select Active Codes button
1. If active 545-5 code is present,
Short to Ground -
(Figure 17, Item 1).
proceed to step 7.
Continued
2. If no active codes are present,
problem does not exist at this
time. Resume normal operation.
Figure 17. Override in Progress and Active Code Box.
019
7. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
8. Disconnect engine harness ether
relay connector V-C18 (WP 0018,
Figure 43) from ether relay.
9. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-2410-241-10).
10. Check for Diagnostic Codes or
1. If active 545-5 code is present,
Event Codes (WP 0013).
replace ether aid relay (WP
0060). Ensure all harness con-
nectors are reconnected. Verify
correct operation of machine
(TM 5-2410-241-10).
2. If no active codes are present,
proceed to step 11.
11. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
12. Disconnect engine ECM connec-
tor V-C4 (WP 0018, Figure 1)
from engine ECM. (WP 0101).