TM 5-2410-241-23-1
0021
Table 2. Chassis Troubleshooting Procedures - Continued.
0021
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
882-3 Hydraulic Lockout
10. Remove right platform access
Solenoid Voltage Above
panel (WP 0213).
Normal - Continued
11. Disconnect RH console harness
connector R-C1 (WP 0018, Figure
14) from RH platform harness
connector MA-C1 (WP 0018, Fig-
ure 15).
12. Using digital multimeter (WP
1.
If continuity is found, proceed to
0296), test for continuity between
step 13.
pin 1 on platform harness connec- 2.
If continuity is NOT found, replace
tor MA-C17 (WP 0018, Figure 85)
platform harness (WP 0209).
and pin 51 on platform harness
Ensure all harness connectors
connector MA-C14 (WP 0018,
are reconnected. Verify correct
Figure 33).
operation of machine (TM 5-2410-
241-10).
13. Using digital multimeter (WP
1. If continuity is NOT found, pro-
0296), test for continuity between
ceed to step 14.
pin 51 on platform harness con-
2. If continuity is found, replace plat-
nector MA-C14 (WP 0018,
form harness (WP 0209). Ensure
Figure 33) and all other pins in
all harness connectors are recon-
platform harness connector
nected. Verify correct operation of
MA-C14 (WP 0018, Figure 33).
machine (TM 5-2410-241-10).
14. Using digital multimeter (WP
1. If continuity is found, proceed to
0296), test for continuity between
step 15.
pin 51 on platform harness con-
2. If continuity is NOT found, replace
nector MA-C14 (WP 0018,
platform harness (WP 0209).
Figure 33) and pin 11 on RH plat-
Ensure all harness connectors
form harness connector MA-C1
are reconnected. Verify correct
(WP 0018, Figure 15).
operation of machine (TM 5-2410-
241-10).
15. Using digital multimeter (WP
1. If continuity is found, proceed to
0296), test for continuity between
step 16.
pin 64 on platform harness con-
2. If continuity is NOT found, replace
nector MA-C14 (WP 0018,
platform harness (WP 0209).
Figure 33) and pin 8 on RH plat-
Ensure all harness connectors
form harness connector MA-C1
are reconnected. Verify correct
(WP 0018, Figure 15).
operation of machine (TM 5-2410-
241-10).
0021-37