TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
All Windshield Wipers and
62. Turn left door wiper switch to the
1. If left door wiper is working, pro-
Washers Do NOT Oper-
LOW, HIGH, and OFF position
ceed to step 63.
ate - Continued
(TM 5-2410-241-10).
2. If left door wiper is NOT working,
replace Fuse #1 (TM 5-2410-241-
10) and left door wiper switch (WP
0234). Ensure all harness con-
nectors are reconnected. Verify
correct operation of machine (TM
5-2410-241-10).
63. Activate left door washer (TM 5-
1. If left door washer is working, pro-
2410-241-10).
ceed to step 64.
2. If left door washer is NOT work-
ing, replace Fuse #1 (TM 5-2410-
241-10) and left door wiper switch
(WP 0234). Ensure all harness
connectors are reconnected. Ver-
ify correct operation of machine
(TM 5-2410-241-10).
64. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
65. Remove front wiper motor trim
panel (WP 0229).
66. Remove rear wiper motor trim
panel (WP 0229).
67. Disconnect cab harness front
wiper motor connector H-C1 (WP
0018, Figure 123) from front wiper
motor (WP 0222).
68. Disconnect headliner harness
connector HA-C1 (WP 0018, Fig-
ure 134) from cab harness con-
nector H-C7 (WP 0018, Figure
133).
69. Disconnect headliner harness
connector HA-C2 (WP 0018, Fig-
ure 115) from cab harness con-
nector H-C6 (WP 0018, Figure
114).
0022-53