TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
All Windshield Wipers and
32. Using digital multimeter
1. If continuity NOT is found, pro-
Washers Do NOT Oper-
(WP 0296), test for continuity
ceed to step 33.
ate - Continued
between pin 1 on fuse panel wir-
2. If continuity is found, replace Fuse
ing harness connector A-C1 (WP
#1 (TM 5-2410-241-10) and fuse
0018, Figure 22) and ground.
panel wiring harness (WP
0176).Ensure all harness connec-
tors are reconnected. Verify cor-
rect operation of machine (TM 5-
2410-241-10).
33. Disconnect instrument panel har-
ness connector E-C16 (WP 0018,
Figure 112) from cab harness
connector H-C2 (WP 0018, Figure
113).
34. Using digital multimeter (WP
1.
If continuity is NOT found, pro-
0296), test for continuity between
ceed to step 35.
pin 1 on platform harness connec- 2.
If continuity is found, replace Fuse
tor MA-C3 (WP 0018, Figure 21)
#1 (TM 5-2410-241-10), platform
and all other pins in platform har-
harness (WP 0209), and instru-
ness connector MA-C3 (WP
ment panel harness (WP 0260).
0018, Figure 21).
Ensure all harness connectors
are reconnected. Verify correct
operation of machine (TM 5-2410-
241-10).
35. Using digital multimeter (WP
1.
If continuity is NOT found, pro-
0296), test for continuity between
ceed to step 36.
pin 1 on platform harness connec- 2.
If continuity is found, replace Fuse
tor MA-C3 (WP 0018, Figure 21)
#1 (TM 5-2410-241-10), platform
and ground.
harness (WP 0209), and instru-
ment panel harness (WP 0260).
Ensure all harness connectors
are reconnected. Verify correct
operation of machine (TM 5-2410-
241-10).
36. Remove front wiper motor trim
panel (WP 0229).
37. Remove rear wiper motor trim
panel (WP 0229).
38. Disconnect headliner harness
connector HA-C2 (WP 0018, Fig-
ure 115) from cab harness con-
nector H-C6 (WP 0018, Figure
114)
39. Disconnect cab harness front
wiper motor connector H-C1 (WP
0018, Figure 123) from front wiper
motor (WP 0222).
0022-49
