TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
All Windshield Wipers and
3. Remove Fuse #1 (Figure 9,
Washers Do NOT Oper-
Item 1) from fuse panel (TM 5-
ate - Continued
2410-241-10).
Figure 9. Fuse #1.
0022
4. Using digital multimeter (WP
1. If continuity is found, proceed to
0296), test for continuity between
step 19.
blades of Fuse #1.
2. If continuity is NOT found, replace
Fuse #1(TM 5-2410-241-10). Pro-
ceed to step 5.
5. Disconnect engine harness
(engine to platform) connector
V-C1 (WP 0018, Figure 12) from
platform harness (platform to
engine) connector MA-C22 (WP
0018, Figure 11).
6. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-2410-241-10).
7. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
8. Remove Fuse #1 (Figure 9,
Item 1) from fuse panel (TM 5-
2410-241-10).
9. Using digital multimeter (WP
1. If continuity is found, install Fuse
0296), test for continuity between
#1 on fuse panel (TM 5-2410-241-
blades of Fuse #1.
10). Proceed to step 10.
2. If continuity is NOT found, pro-
ceed to step 31.
