TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Engine Flood Lamp Does
13. Remove Fuse # 16 (Figure 7,
Not Work - Continued
Item 1) from fuse panel (TM 5-
2410-241-10)
Figure 7. Fuse #16.
0022
14. Using a digital multimeter (WP
1. If continuity is NOT found, replace
0296), test for continuity between
Fuse #16 (TM 5-2410-241-10)
blades of Fuse #16.
and proceed to step 15.
2. If continuity is found, install Fuse
#16 on fuse panel (TM 5-2410-
241-10). Proceed to step 21.
15. Connect engine harness connec-
tor V-C16 (WP 0018, Figure 110)
to engine flood lamp.
16. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-2410-241-10).
1. If engine flood lamp does NOT
17. Turn on engine flood lamp switch
operate, proceed to step 18.
and verify operation of engine
flood lamp (TM 5-2410-241-10).
2. If engine flood lamp operates,
resume normal operation (TM 5-
2410-241-10).
18. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).