TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ROPS Mounted Rearward
87. Using digital multimeter (WP
1. If continuity is found, proceed to
Facing Floodlamp(s) Do
0296), test for continuity between
step 88.
Not Work - Continued
pin 5 and pin 6 on rear facing
2. If continuity is NOT found, replace
floodlight switch.
rear facing floodlight switch (WP
0262). Ensure all harness con-
nectors are reconnected. Verify
correct operation of machine (TM
5-2410-241-10).
88. Disconnect instrument panel har-
ness connector E-C22 (WP 0018,
Figure 109) from rear facing flood-
light switch (WP 0262).
89. Using digital multimeter (WP
1. If continuity is found, proceed to
0296), test for continuity between
step 90.
pin 6 and pin 5 on rear facing
2. If continuity is NOT found, replace
floodlight switch.
rear facing floodlight switch (WP
0262). Ensure all harness con-
nectors are reconnected. Verify
correct operation of machine (TM
5-2410-241-10).
90. Disconnect fuel tank harness con-
nector TW-C7 (WP 0018, Figure
80) from platform harness con-
nector MA-C23 (WP 0018, Figure
79).
91. Using digital multimeter (WP
1. If continuity is found, replace plat-
0296), test for continuity between
form harness (WP 0209) and
pin 1 and pin 2 on fuel tank har-
instrument panel harness (WP
ness connector TW-C7 (WP
0260). Ensure all harness con-
0018, Figure 80).
nectors are reconnected. Verify
correct operation of machine (TM
5-2410-241-10).
2. If continuity is NOT found, replace
fuel tank harness (WP 0170).
Ensure all harness connectors
are reconnected. Verify correct
operation of machine (TM 5-2410-
241-10).
92. Disconnect right rear flood lamp
harness connector TJ-C1 (WP
0018, Figure 108) from right rear-
ward facing flood lamp.
93. Disconnect left rear flood lamp
harness connector TK-C1 (WP
0018, Figure 107) from left rear-
ward facing flood lamp.
0022-37