TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ROPS Mounted Rearward
58. Inspect inside of left rearward fac- 1. If corrosion or damage is found,
Facing Floodlamp(s) Do
ing flood lamp for corrosion and
replace left rearward facing flood
Not Work - Continued
damage.
lamp assembly (WP 0252).
Ensure all harness connectors
are reconnected. Verify correct
operation of machine (TM 5-2410-
241-10).
2. If corrosion and damage is NOT
found, proceed to step 59.
59. Using digital multimeter (WP
1. If continuity is found, proceed to
0296), test for continuity between
step 60.
pin 1 and terminal 4 on left rear-
2. If continuity is NOT found, replace
ward facing flood lamp (WP 0018,
left rearward facing flood lamp
Figure 180).
assembly (WP 0252). Ensure all
harness connectors are recon-
nected. Verify correct operation of
machine (TM 5-2410-241-10).
60. Using digital multimeter (WP
1. If continuity is found, replace left
0296), test for continuity between
rearward facing flood lamp bulb
pin 2 and terminal 3 on left rear-
(WP 0252). Ensure all harness
ward facing flood lamp (WP 0018,
connectors are reconnected. Ver-
Figure 180).
ify correct operation of machine
(TM 5-2410-241-10).
2. If continuity is NOT found, replace
left rearward facing flood lamp
assembly (WP 0252). Ensure all
harness connectors are recon-
nected. Verify correct operation of
machine (TM 5-2410-241-10).
61. Turn rear facing floodlight switch to
OFF position (TM 5-2410-241-
10).
62. Turn main light switch to OFF
position (TM 5-2410-241-10).
63. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
0022-33
