TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ROPS Mounted Rearward
31. Inspect inside of right rearward
1. If corrosion or damage is found,
Facing Floodlamp(s) Do
facing flood lamp for corrosion
replace right rearward facing flood
Not Work - Continued
and damage.
lamp assembly (WP 0252).
Ensure all harness connectors
are reconnected. Verify correct
operation of machine (TM 5-2410-
241-10).
2. If corrosion and damage is NOT
found, proceed to step 32.
32. Using digital multimeter (WP
1. If continuity is found, proceed to
0296), test for continuity between
step 33.
pin 1 and terminal 4 on right rear-
2. If continuity is NOT found, replace
ward facing flood lamp (WP 0018,
right rearward facing flood lamp
Figure 180).
assembly (WP 0252). Ensure all
harness connectors are recon-
nected. Verify correct operation of
machine (TM 5-2410-241-10).
33. Using digital multimeter (WP
1. If continuity is found, replace right
0296), test for continuity between
rearward facing flood lamp bulb
pin 2 and terminal 3 on right rear-
(WP 0252). Ensure all harness
ward facing flood lamp (WP 0018,
connectors are reconnected. Ver-
Figure 180).
ify correct operation of machine
(TM 5-2410-241-10).
2. If continuity is NOT found, replace
right rearward facing flood lamp
assembly (WP 0252). Ensure all
harness connectors are recon-
nected. Verify correct operation of
machine (TM 5-2410-241-10).
34. Turn rear facing floodlight switch to
OFF position (TM 5-2410-241-
10).
35. Turn main light switch to OFF
position (TM 5-2410-241-10).
36. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
37. Disconnect right rear flood lamp
harness connector TJ-C3 (WP
0018, Figure 104) from fuel tank
harness connector TW-C5 (WP
0018, Figure 106).
0022-30