TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ROPS Mounted Rearward
13. Using digital multimeter (WP
1. If continuity is found, proceed to
Facing Floodlamp(s) Do
0296), test for continuity between
step 14.
Not Work - Continued
pin 1 and terminal 4 on left rear-
2. If continuity is NOT found, replace
ward facing flood lamp (WP 0018,
left rearward facing flood lamp
Figure 180).
assembly (WP 0252). Ensure all
harness connectors are recon-
nected. Verify correct operation of
machine (TM 5-2410-241-10).
14. Using digital multimeter (WP
1. If continuity is found, replace left
0296), test for continuity between
rearward facing flood lamp bulb
pin 2 and terminal 3 on left rear-
(WP 0252). Ensure all harness
ward facing flood lamp (WP 0018,
connectors are reconnected. Ver-
Figure 180).
ify correct operation of machine
(TM 5-2410-241-10).
2. If continuity is NOT found, replace
left rearward facing flood lamp
assembly (WP 0252). Ensure all
harness connectors are recon-
nected. Verify correct operation of
machine (TM 5-2410-241-10).
15. Turn rear facing floodlight switch to
OFF position (TM 5-2410-241-
10).
16. Turn main light switch to OFF
position (TM 5-2410-241-10).
17. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
18. Disconnect left rear flood lamp
harness connector TK-C3 (WP
0018, Figure 103) from fuel tank
harness TW-C3 (WP 0018, Figure
105).
19. Using digital multimeter (WP
1.
If continuity is found, proceed to
0296), test for continuity between
step 20.
pin 1 on left rear flood lamp har-
2.
If continuity is NOT found, replace
ness connector TK-C3 (WP 0018,
left rear flood lamp harness (WP
Figure 103) and pin 1 on left rear
0154). Ensure all harness con-
flood lamp harness connector TK-
nectors are reconnected. Verify
C1 (WP 0018, Figure 107).
correct operation of machine (TM
5-2410-241-10).
0022-28
