TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ROPS Mounted Rearward
20. Using digital multimeter (WP
1.
If continuity is found, replace fuel
Facing Floodlamp(s) Do
0296), test for continuity between
tank harness (WP 0170). Ensure
Not Work - Continued
pin 2 on left rear flood lamp har-
all harness connectors are recon-
ness connector TK-C3 (WP 0018,
nected. Verify correct operation of
Figure 103) and pin 2 on left rear
machine (TM 5-2410-241-10).
flood lamp harness connector TK- 2.
If continuity is NOT found, replace
C1 (WP 0018, Figure 107).
left rear flood lamp harness (WP
0154). Ensure all harness con-
nectors are reconnected. Verify
correct operation of machine (TM
5-2410-241-10).
21. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
22. Disconnect right rear flood lamp
harness connector TJ-C1 (WP
0018, Figure 108) from right rear
flood lamp.
23. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-2410-241-10).
24. Turn main light switch to Flood-
light position (TM 5-2410-241-10).
25. Turn rear facing floodlight switch to
ON position.
26. Using digital multimeter (WP
1. If 24 Volts is found, proceed to
0296), measure for voltage
step 27.
between pin 1 and 2 on right rear
2. If 24 Volts is NOT found, proceed
flood lamp harness connector TJ-
to step 34.
C1 (WP 0018, Figure 108).
27. Turn rear facing floodlight switch to
OFF position (TM 5-2410-241-
10).
28. Turn main light switch to OFF
position (TM 5-2410-241-10).
29. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
30. Remove and disassemble right
rearward facing flood lamp (WP
0210).
0022-29
