TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ROPS Mounted Rearward
38. Using digital multimeter (WP
1. If continuity is found, proceed to
Facing Floodlamp(s) Do
0296), test for continuity between
step 39.
Not Work - Continued
pin 1 on right rear flood lamp har-
2. If continuity is NOT found, replace
ness connector TJ-C3 (WP 0018,
right rear flood lamp harness (WP
Figure 104) and pin 1 on right rear
0154). Ensure all harness con-
flood lamp harness connector TJ-
nectors are reconnected. Verify
C1 (WP 0018, Figure 108).
correct operation of machine (TM
5-2410-241-10).
39. Using digital multimeter (WP
1. If continuity is found, replace fuel
0296), test for continuity between
tank harness (WP 0170). Ensure
pin 2 on right rear flood lamp har-
all harness connectors are recon-
ness connector TJ-C3 (WP 0018,
nected. Verify correct operation of
Figure 104) and pin 2 on right rear
machine (TM 5-2410-241-10).
flood lamp harness connector TJ-
2. If continuity is NOT found, replace
C1 (WP 0018, Figure 108).
right rear flood lamp harness (WP
0154). Ensure all harness con-
nectors are reconnected. Verify
correct operation of machine (TM
5-2410-241-10).
40. Turn rear facing floodlight switch to
OFF position (TM 5-2410-241-
10).
41. Turn main light switch to OFF
position (TM 5-2410-241-10).
42. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
43. Disconnect right rear flood lamp
harness connector TJ-C1 (WP
0018, Figure 108) from right rear-
ward facing flood lamp.
44. Disconnect left rear flood lamp
harness connector TK-C1 (WP
0018, Figure 107) from left rear-
ward facing flood lamp.
45. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-2410-241-10).
46. Turn main light switch to floodlight
position (TM 5-2410-241-10).
47. Turn rear facing floodlight switch to
ON position (TM 5-2410-241-10).
0022-31