TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ROPS Mounted Rearward
71. Verify operation of rearward fac-
1. If rearward facing flood lamps do
Facing Floodlamp(s) Do
ing flood lamps (TM 5-2410-241-
NOT operate, proceed to step 72.
Not Work - Continued
10).
2. If rearward facing flood lamps
operate, resume normal operation
(TM 5-2410-241-10).
72. Turn rear facing floodlight switch to
OFF position (TM 5-2410-241-
10).
73. Turn main light switch to OFF
position (TM 5-2410-241-10).
74. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
75. Remove Fuse # 9 (Figure 6,
Item 1) from fuse panel (TM 5-
2410-241-10).
Figure 6. Fuse #9.
0022
76. Using a digital multimeter (WP
1. If continuity is NOT found, pro-
0296), test for continuity between
ceed to step 92.
blades of Fuse #9.
2. If continuity is found, install Fuse
#9 on fuse panel (TM 5-2410-241-
10). Proceed to step 77.
77. Disconnect left rear flood lamp
harness connector TK-C3 (WP
0018, Figure 103) from fuel tank
harness connector TW-C3 (WP
0018, Figure 105).
