TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ROPS Mounted Rearward
94. Disconnect platform harness con-
Facing Floodlamp(s) Do
nector MA-C3 (WP 0018, Figure
Not Work - Continued
21) from fuse panel harness con-
nector A-C1 (WP 0018,
Figure 22).
95. Using digital multimeter (WP
1. If continuity is found, replace fuse
0296), test for continuity between
panel harness (WP 0176).
pin 27 on platform harness con-
Replace Fuse #9 (TM 5-2410-
nector MA-C3 (WP 0018,
241-10). Ensure all harness con-
Figure 21) and machine ground.
nectors are reconnected. Verify
correct operation of machine (TM
5-2410-241-10).
2. If continuity is NOT found, pro-
ceed to step 96.
96. Disconnect fuel tank harness con-
nector TW-C7 (WP 0018,
Figure 80) from platform harness
connector MA-C23 (WP 0018,
Figure 79).
97. Using digital multimeter (WP
1. If continuity is found, proceed to
0296), test for continuity between
step 98.
pin 1 and pin 2 on fuel tank har-
2. If continuity is NOT found, replace
ness connector TW-C7 (WP
platform harness (WP 0209) and
0018, Figure 80).
instrument panel harness (WP
0260). Replace Fuse #9 (TM 5-
2410-241-10). Ensure all harness
connectors are reconnected. Ver-
ify correct operation of machine
(TM 5-2410-241-10).
98. Disconnect left rear flood lamp
harness connector TK-C3 (WP
0018, Figure 103) from fuel tank
harness connector TW-C3 (WP
0018, Figure 105).
99. Using digital multimeter (WP
1. If continuity is found, replace left
0296), test for continuity between
rear flood lamp harness (WP
pin 1 and pin 2 on left rear flood
0154). Replace Fuse #9 (TM 5-
lamp harness connector TK-C3
2410-241-10). Ensure all harness
(WP 0018, Figure 103).
connectors are reconnected. Ver-
ify correct operation of machine
(TM 5-2410-241-10).
2. If continuity is NOT found, pro-
ceed to step 100.
0022-38
