TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Engine Flood Lamp Does
25. Using digital multimeter (WP
1. If continuity is NOT found, pro-
Not Work - Continued
0296), test for continuity between
ceed to step 26.
pin 30 on platform harness con-
2. If continuity is found, replace fuse
nector MA-C3 (WP 0018, Figure
panel wiring harness (WP 0176).
21) and machine ground.
Ensure all harness connectors
are reconnected. Verify correct
operation of machine (TM 5-2410-
241-10).
26. Disconnect engine harness con-
nector V-C1 (WP 0018, Figure 12)
from platform harness connector
MA-C22 (WP 0018, Figure 11).
27. Using digital multimeter (WP
1. If continuity is NOT found, pro-
0296), test for continuity between
ceed to step 28.
pin 3 and pin 8 on engine harness
2. If continuity is NOT found, replace
connector V-C1 (WP 0018, Figure
platform harness (WP 0209).
12).
Ensure all harness connectors
are reconnected. Verify correct
operation of machine (TM 5-2410-
241-10).
28. Disconnect engine harness con-
nector V-C17 (WP 0018, Figure
111) from engine flood lamp
switch.
29. Using digital multimeter (WP
1. If continuity is NOT found, replace
0296), test for continuity between
engine flood lamp switch (WP
pin B and pin A on engine har-
0253). Ensure all harness con-
ness connector V-C17 (WP 0018,
nectors are reconnected. Verify
Figure 111).
correct operation of machine (TM
5-2410-241-10).
2. If continuity is found, replace
engine harness (WP 0105).
Ensure all harness connectors
are reconnected. Verify correct
operation of machine (TM 5-2410-
241-10).
30. Disconnect engine harness con-
nector V-C16 (WP 0018, Figure
110) from engine flood lamp.
31. Disconnect platform harness con-
nector MA-C3 (WP 0018, Figure
21) from fuse panel wiring har-
ness connector A-C1 (WP 0018,
Figure 22).
0022-43