TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
All Windshield Wipers and
10. Turn battery disconnect switch
Washers Do NOT Oper-
and ignition switch to ON position
ate - Continued
(TM 5-2410-241-10).
11. Turn front wiper switch to the
1. If wiper is working, proceed to
LOW, HIGH, and OFF position
step 12.
(TM 5-2410-241-10).
2. If wiper is NOT working, proceed
to step 58.
1. If washer is working, proceed to
12. Activate front windshield washer
(TM 5-2410-241-10).
step 13.
2. If washer is NOT working, pro-
ceed to step 125.
13. Turn left door wiper switch to the
1. If wiper is working, proceed to
LOW, HIGH, and OFF position
step 14.
(TM 5-2410-241-10).
2. If wiper is NOT working, proceed
to step 76.
14. Activate left door washer (TM 5-
1. If washer is working, proceed to
2410-241-10).
step 15.
2. If washer is NOT working, pro-
ceed to step 138.
15. Turn right door wiper switch to the
1. If wiper is working, proceed to
LOW, HIGH, and OFF position
step 16.
(TM 5-2410-241-10).
2. If wiper is NOT working, proceed
to step 93.
16. Activate right door washer (TM 5-
1. If washer is working, proceed to
2410-241-10).
step 17.
2. If washer is NOT working, pro-
ceed to step 151.
17. Turn rear wiper switch to the Low,
1. If wiper is working, proceed to
HIGH, and OFF position (TM 5-
step 18.
2410-241-10).
2. If wiper is NOT working, proceed
to step 110.
18. Activate rear washer (TM 5-2410- 1. If washer is working, ether aid
241-10).
may be cause of open fuse. Pro-
ceed to Ether Aid Does NOT
Work in this work package to
diagnose ether system.
2. If washer is NOT working, pro-
ceed to step 164.
19. Disconnect platform harness con-
nector MA-C3 (WP 0018, Figure
21) from fuse panel wiring har-
ness connector A-C1 (WP 0018,
Figure 22).
0022-46
