2
TM 5-2410-241-23-1
FIELD MAINTENANCE
-
SERVICE UPON RECEIPT
004
0
General, Inspection Instructions, Servicing Instructions
INITIAL SETUP
References - Continued
Tools and Special Tools
0
0
Tool Kit, General Mechanic's
TM 43-0139
0
(WP 0302, Item 65)
TM 5-2410-241-10
0
0
Gloves, Rubber (S0208)
0
(WP 0302, Item 68)
0
0
Goggles (S0209)
0
(WP 0302, Item 68)
0
DA Form 2404
0
Materials/Parts
DA Form 5988-E
0
0
DD Form 1397
Cleaning Compound, Solvent, Type III
0
SF Form 364
(WP 0303, Item 6)
0
0
Rag, Wiping (WP 0303, Item 24)
0
Equipment Conditions
0
References
Machine parked (TM 5-2410-241-10)
0
0
TB 43-0242
0
GENERAL
0040
1. When a new or reconditioned D7R Dozer, Type I with Winch or D7R Dozer, Type II with Ripper is first received,
determine whether it has been properly prepared for service and is in condition to perform its mission.
2. Follow these inspection and servicing instructions to assess the dozer's condition.
INSPECTION INSTRUCTIONS
0040
1. Read and follow all precautions and instructions on DD Form 1397, Processing and Deprocessing Record for
Shipment, Storage, and Issue of Vehicles and Spare Engines.
2. Remove all packing and shipping material, such as tape, tiedown straps, protective covers, and shipping seals.
Remove tape from exhaust pipe.
WARN I N G
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and
low-toxic material. However, it may be irritating to the eyes and skin. Use protective gloves
and goggles. Use in well-ventilated areas. Keep away from open flames and other
sources of ignition. Failure to do so may result in injury or death to personnel.
3. Clean any exposed metal parts coated with rust-preventive compound using Cleaning Compound, Solvent,
Type III (WP 0303, Item 6).
4. Inspect equipment for any damage incurred during shipment. Check if equipment has been modified.
0040-1
