TM 5-2410-241-23-1
0041
INSTALLATION CONTINUED
3. Install cooler (Figure 3, Item 3), two washers (Figure 3, Item 1), and nuts (Figure 3, Item 2) on machine.
4. Install two washers (Figure 3, Item 10), bolts (Figure 3, Item 9) on cooler (Figure 3, Item 3).
5. Install fitting (Figure 3, Item 8) on cooler (Figure 3, Item 3).
6. Connect lower hose (Figure 3, Item 7) on fitting (Figure 3, Item 8).
7. Install fitting (Figure 3, Item 5) and plug (Figure 3, Item 4) on cooler (Figure 3, Item 3).
8. Connect upper hose (Figure 3, Item 6) on fitting (Figure 3, Item 5).
Figure 3. Cooler.
0041
END OF TASK
FOLLOW-ON TASKS
00041
1. Fill hydraulic tank (WP 0184).
2. Install engine enclosure left door guard (WP 0202).
3. Verify correct operation of machine (TM 5-2410-241-10).
END OF TASK
END OF WORK PACKAGE
