TM 5-2410-241-23-1
0042
REMOVAL
00042
N OT E
Tag hoses, lines and fittings to aid installation.
1. Loosen clamp (Figure 1, Item 6) from hose (Figure 1, Item 7).
2. Remove hose (Figure 1, Item 7) from fitting (Figure 1, Item 8).
3. Remove eight bolts (Figure 1, Item 2), washers (Figure 1, Item 3), clamp (Figure 1, Item 4), and lines (Figure 1,
Item 1) from transmission oil cooler (Figure 1, Item 5).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may cause injury or death to personnel.
N OT E
Transmission oil cooler weighs approximately 65 lb (29.5 kg).
4. With assistance, remove two bolts (Figure 1, Item 9), washers (Figure 1, Item 10) and transmission oil cooler
(Figure 1, Item 5) from bracket (Figure 1, Item 11).
5. Remove two O-rings (Figure 1, Item 12) from lines (Figure 1, Item 1). Discard O-rings.
Figure 1. Hose and Lines.
0042