2
TM 5-2410-241-23-1
FIELD MAINTENANCE
-
CRANK WITHOUT INJECTION WIRING HARNESS ASSEMBLY REPLACEMENT
0056
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Equipment Condition
Tools and Special Tools
0
0
Tool Kit, General Mechanic's
Machine parked (TM 5-2410-241-10)
0
(WP 0302, Item 65)
0
Drawing Required
0
Materials/Parts
TM 5-2410-241-24P, Figure 11
0
0
Rag, Wiping (WP 0303, Item 24)
0
Estimated Time to Complete
0
Tag, Marker (WP 0303, Item 34)
0
0.5 Hr
Tiedown Strap (WP 0303, Item 36)
0
0
References
0
WP 0295
0
REMOVAL
00056
N OT E
Note harness routing to aid installation.
Tag and mark all electrical connections to aid installation.
1. Disconnect plug (Figure 1, Item 6) from connector (Figure 1, Item 5).
2. Remove tiedown strap (Figure 1, Item 1) from wiring harness (Figure 1, Item 2). Discard tiedown strap.
3. Remove two tiedown straps (Figure 1, Item 3) from wiring harness (Figure 1, Item 2) and connector (Figure 1,
Item 4). Discard tiedown straps.
4. Disconnect connector (Figure 1, Item 4) from wiring harness (Figure 1, Item 2).
5. Remove harness (Figure 1, Item 2) from machine.
Figure 1. Fuel Temperature Sensor Harness.
0056
END OF TASK