• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 38. Engine ECM and Retaining Hardware.
Figure 40. Oil Pressure Sensor.

Field Maintenance Manual D7R Dozer Type I With Winch and Type II With Ripper
Page Navigation
  36    37    38    39    40  41  42    43    44    45    46  
img
.
TM 5-2410-241-23-2
0057
REMOVE ENGINE FROM STAND CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Starter weighs approximately 80 lb (36 kg).
20. Install new gasket (Figure 39, Item 1) on starter (Figure 39, Item 3).
21. With assistance, install starter (Figure 39, Item 3) and three bolts (Figure 39, Item 2) on engine.
Figure 39. Starter.
0057
0057-41


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.