TM 5-2410-241-23-2
0061
REMOVAL CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Starter weighs approximately 80 lb (36 kg).
6. Attach lifting device to starter (Figure 3, Item 2).
7. Using lifting device, remove three bolts (Figure 3, Item 1), starter (Figure 3, Item 2) and gasket (Figure 3,
Item 3) from machine. Discard gasket.
8. Place starter (Figure 3, Item 2) on flat level surface and remove lifting device.
Figure 3. Starter.
0061
END OF TASK
CLEANING AND INSPECTION
00061
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
