TM 5-2410-241-23-2
0091
REMOVAL CONTINUED
N OT E
Tag electrical connectors to aid installation.
2. Disconnect connector (Figure 2, Item 1) from engine oil pressure sensor (Figure 2, Item 2).
3. Remove engine oil pressure sensor (Figure 2, Item 2) and O-ring (Figure 2, Item 3) from fitting (Figure 2,
Item 4). Discard O-ring.
4. Remove fitting (Figure 2, Item 4) from engine (Figure 2, Item 5).
Figure 2. Engine Oil Pressure Sensor.
0091
END OF TASK
CLEANING AND INSPECTION
00091
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
INSTALLATION
00091
N OT E
Install electrical connectors as tagged during removal.
1. Install fitting (Figure 2, Item 4) on engine (Figure 2, Item 5).
2. Install new O-ring (Figure 2, Item 3) and engine oil pressure sensor (Figure 2, Item 2) on fitting (Figure 2,
Item 4).
3. Connect connector (Figure 2, Item 1) on engine oil pressure sensor (Figure 2, Item 2).