TM 5-2410-241-23-2
0092
REMOVAL
00092
N OT E
Tag electrical connectors to aid installation.
1. Remove tiedown strap (Figure 1, Item 2) from aftercooler housing (Figure 1, Item 6). Discard tiedown strap.
2. Disconnect connector (Figure 1, Item 7) from connector (Figure 1, Item 1).
3. Remove air inlet manifold pressure sensor (Figure 1, Item 5) from fitting (Figure 1, Item 4).
4. Remove fitting (Figure 1, Item 4) from aftercooler housing (Figure 1, Item 6).
5. Remove two O-rings (Figure 1, Item 3) from fitting (Figure 1, Item 4). Discard O-rings.
Figure 1. Air Inlet Manifold Pressure Sensor.
0092
END OF TASK
