TM 5-2410-241-23-2
0121
REMOVAL
000121
1. Remove four locknuts (Figure 1, Item 1), washers (Figure 1, Item 2), bolts (Figure 1, Item 7), and washers
(Figure 1, Item 8) from two tube assemblies (Figure 1, Item 3). Discard locknuts.
2. Remove two tube assemblies (Figure 1, Item 3) from machine.
3. Remove spring pin (Figure 1, Item 4), two washers (Figure 1, Item 5), and springs (Figure 1, Item 6) from tube
assembly (Figure 1, Item 3).
4. Repeat step 3 for other tube assembly.
Figure 1. Transmission Mounting Tubes.
0121
END OF TASK
CLEANING AND INSPECTION
000121
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
