• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 1. Track Shoe.
TRACK LINK REPLACEMENT

Field Maintenance Manual D7R Dozer Type I With Winch and Type II With Ripper
Page Navigation
  615    616    617    618    619  620  621    622    623    624    625  
img
TM 5-2410-241-23-2
0128
INSTALLATION
000128
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
This procedure will install one track shoe. Follo the same procedure for additional track
w
shoes.
Track shoe weighs approximately 85 lb (40 kg).
With assistance, install track shoe (Figure 1, Item 3), four nuts (Figure 1, Item 2), and bolts (Figure 1, Item 1) on
machine. Tighten bolts to 250 lb-ft (340 Nm). Tighten bolts additional 120 degrees.
END OF TASK
FOLLOW-ON TASKS
000128
Verify correct operation of machine (TM 5-2410-241-10).
END OF TASK
END OF WORK PACKAGE
0128-3/(4 blank)


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.