• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
TRACK SHOE REPLACEMENT
TRACK SHOE REPLACEMENT - Continued

Field Maintenance Manual D7R Dozer Type I With Winch and Type II With Ripper
Page Navigation
  614    615    616    617    618  619  620    621    622    623    624  
img
.
TM 5-2410-241-23-2
0128
REMOVAL
000128
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
This procedure will removeone track shoe. Follow the same procedure for additional track
shoes.
Track shoe weighs approximately 85 lb (40 kg).
With assistance, remove four bolts (Figure 1, Item 1), nuts (Figure 1, Item 2), and track shoe (Figure 1, Item 3) from
machine.
Figure 1. Track Shoe.
0128
END OF TASK
CLEANING AND INSPECTION
000128
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
0128-2


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.